Automatic Controlled 100kgs Ice Maker for Food Processing

Automatic Controlled 100kgs Ice Maker for Food Processing

But if you put probes in direct contact with the electronic parts on the board or the soldering feet, it's likely to crush some of the electronic parts. So there's a test point that leads to an extra pair of circular dots at both ends of the part.
Chat Now

Product Details

We can easily present you with almost every style of merchandise linked to our merchandise range for green circuit board, circuit card assembly, order circuit boards. All gorgeous words are floating clouds, we use facts to prove. Welcome friends from all over the world come to visit, guide and negotiate. With strong technical strength, our research and development and manufacturing capabilities have reached the advanced level of the industry.

PCB Knowledge:

The PCB factory sets up test points to test whether the components on the circuit board conform to specifications and weldability. For example, they want to check the resistor on a circuit board to see if there is any problem. The easiest way is to measure both ends by multimeter.

But in mass-produced factories, it's impossible to measure every resistor, capacitor, inductor, or even IC circuit on each board with a meter. So the ICT (In-Circuit-Test) appears, which uses Bed-Of-Nails to touch all the parts on the board. Then the characteristics of electronic parts are measured sequentially by programming, mainly by sequence, and by juxtaposition. It takes only about 1 to 2 minutes to test all the parts. It depends on the number of parts on the circuit board, the more parts the longer.

But if you put probes in direct contact with the electronic parts on the board or the soldering pins, it's likely to crush some of the electronic parts. So there's a test point that leads to an extra pair of circular dots at both ends of the part. There is no mask. It can get the probe for the test to come into contact with these dots. It is no direct contact with the measured electronic parts.(pcb board maker)


Process of pcb manufacturing:


image001


Our Factory:

image003

image005


Certifications:

Our Company is UL,ISO9001,ROHS and GJB9001B certified.

image007


Packing and Shipping:

1

2


FAQ:

1. How to Get a quotation?

For PCBs,pls send us the Gerber File.For PCBA,pls send us the Gerber file and BOM(Bill of Materials)

2. What is the MOQ?

No MOQ.1 pcs is ok.

3.What is the lead time?

For PCB orders,the lead time is 2 to 10 days.For PCBA orders,the lead time will be 15 to 30 days.

4.Will the boards be tested before shippment?

Yes,all PCBs will be tested by Flying Probe or E-test.For PCBA,we will have AOI,X-ray,and functional test

Email us to get a quote: admin@brightcircuits.com

 


We have been also specializing in improving the things administration and QC system to ensure that we could preserve terrific gain within the fiercely-competitive company for Automatic Controlled 100kgs Ice Maker for Food Processing. We guarantee to treat all our customers equally, and provide our customers with same working quality and service standard. We always believe that every effort is rewarded maintaining a high morale.
Hot Tags: pcb board maker, China, manufacturers, suppliers, factory, custom, service, PCB, Small Pcb Board, printed circuit board prototype, Pcb Etching, low cost printed circuit board, 4 Layer Pcb

Inquiry

You Might Also Like